![]() ![]() The sensor is based on a rotating magnet situated within a metal coil. The WindSonic/GMX USB Config Cable for easy connection to a PC and power supply. An evolution of B&Gs previous sensors, developed through hours of iterative testing to provide the best solution for sailing wind sensors. Used in the fields of Environmental Science, Weather Science, Ecology, Biology, etc. Use the WindSonic/GMX D9 Serial Config Cable or It is possible to communicate with the sensor direct from a PC using HyperTerminal To change the setting of a WindSonic sensor from the default factory settings, WindSonic automatically transmits an anemometer status code with each Select the output rate and units of measurement that suit the application. Once the wind farm is set up and running, its best. This must require a compatible console or the GW1000 gateway in order to see the data. In order to design a profitable wind farm, the local wind conditions are measured to perform a detailed wind site assessment. The anemometer and light sensor is certainly a nice unit for a user to place the anemometer on a shed or on their roofs to obtain an open area to record as accurate winds as possible. WindSonic sensors can be configured using the free software provided to The main applications of wind measurement are in the field of meteorology and industrial applications such as in wind turbine business. Analogue output type may be selected from 0-5V, 0-20mA or 4-20mA. Note if used with our WS-15A display output must be set to RS422/485. WindSonic Option 3: Transmits using RS232 or RS422/RS485/NMEA and analogue outputs, used when an analogue output is specifically required. ![]() For use where there may be heavy duty electrical equipment in operation in the vicinity. Compatible with RPR's SpaceLogger data loggers and the WeatherFile Communication Unit (WCU) for distances over 20 metres.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |